Field notes from the job: what we find inside panels, what symptoms usually mean, and what to know before a permit, an EV charger or a remodel. Written by the people doing the work, not a content farm.
Panel upgrade with LADWP: the steps, in order, for a home in the City of Los Angeles
How a home panel upgrade works with LADWP and LADBS: the load calculation, LADWP's meter spot, the permit, the inspection release and the new meter.
Read the postWhen the power comes back after a shutoff or outage: what to check in your home
Power back after an SCE shutoff or LADWP outage? Partial power, switching off a generator, tripped breakers, warning signs, food and devices, in order.
Read the postPower problem in a mobile home park: is it the park's job or yours?
Who fixes electrical problems in a California mobilehome park: the park's pedestal and lines, your feeder and home wiring, the utility's role, and who inspects.
Read the postCan my electric car power my house during an outage?
When an EV can back up a home: built-in outlets vs. vehicle-to-home, the bidirectional charger and isolation equipment it needs, utility steps and your panel.
Read the postLights flickering across the whole house, or half the house dark? Likely causes and when it's urgent
One flickering bulb is usually minor. Lights dimming across the whole house, or half the house dark after an outage, can be a service problem. What to do.
Read the postLeasing a shop or warehouse? How to check for three-phase power before you sign
Before leasing a shop or warehouse for machines, confirm the building's voltage, phase and amps, what your equipment needs, and what a utility upgrade involves.
Read the postHome battery backup: whole home or just the essentials?
How to decide what a home battery should run in an outage: a critical-loads subpanel or whole-home backup, big loads, your panel, utility steps and placement.
Read the postBefore a power shutoff: an electrical checklist for your home
What to do before an SCE Public Safety Power Shutoff: alerts, medical devices, the fridge, EV charging, generators and restoring power safely.
Read the postTransfer switch or interlock: how to connect a portable generator safely
A portable generator should reach your house wiring only through a transfer switch or a listed interlock. How each works, and what to do before a shutoff.
Read the postWill my solar panels keep the power on in an outage?
Most grid-tied solar shuts off when the grid goes down. What it takes to keep power on in an outage or shutoff: a backup battery setup or a generator hookup.
Read the postCan you install an EV charger on a 100-amp panel? Often, yes. Here's how we decide
A 100-amp panel doesn't always mean an upgrade before a Level 2 charger. How the load calculation works, your four options, and when to upgrade.
Read the postWhat the electrical notes on a home inspection report mean
Double taps, open grounds, missing GFCIs, a flagged panel: what common home inspection electrical findings mean, what to check first and the usual fix.
Read the postOutlets stopped working but no breaker is tripped? Check these four things first
Outlets or a whole room went dead but every breaker looks on. Four things to check yourself in five minutes, and the warning signs that mean call now.
Read the postRebuilding in Pacific Palisades? Get your electrical ready for underground power
LADWP's rules for Palisades rebuilds: a dual-feed panel, conduit to the property line, and the inspections in between. What to plan before you build.
Read the postWill a heat pump or induction range need a panel upgrade?
Switching to a heat pump or induction range doesn't always mean a new panel. What each one draws, how the load calculation decides, and low-power options.
Read the postBreaker keeps tripping? What it usually means, and what to do first
The three reasons a breaker trips, how to tell which one you have, and the one thing you should never do while you wait for an electrician.
Read the postDo you need a permit for a home EV charger in Los Angeles? Yes, and here's how it goes
A Level 2 charger needs a new 240-volt circuit, so it needs a permit and inspection. What the permit covers, who pulls it, the deadlines cities must meet.
Read the postFederal Pacific and Zinsco panels: why inspectors flag them, and what to do
Two panel brands from the 1950s to 1980s get flagged on home inspections again and again. What is wrong with them, how to spot one, and the fix.
Read the post